surface mount two-way power divider 10 - 500 mhz DSS-333 m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. v2.00 features fully hermetic package 0.5 typical phase balance 40 db typical midband isolation 1.05:1 typical midband vswr guaranteed speci?ations* (from -55? to +85?) frequency range 10-500 mhz insertion loss (less coupling) 10-500 mhz 0.6 db max isolation 25 db min amplitude balance 10-500 mhz 0.15 max phase balance 2 max vswr (all ports) 10-500 mhz 1.4:1 max operating characteristics impedance 50 ohms nominal maximum power rating or input power 1 watt max internal load dissipation 0.05 watts max environmental mil-std-202 screening available. pin con?uration s in p1, output c; p2 output d; p4 case and all other pins ground. * all speci?ations apply with 50 ohm source and load impedance. ordering information model no. package ds-333 pin surface mount 12 34 0.016 w 0.002 (0.41 0.5) x 0.010 t 0.001 (0.25 0.03) 0.060 (1.52) 0.510 0.20 (12.9 0.5) ground tab orientation mark 0.385 0.020 (9.8 0.5) 0.205 (5.21) 0.422 (10.72) 0.072 (1.83) 0.170 (4.31) max weight (approx ) 0 07 ounces 2 grams 0.305 (7.75) typical performance l l l l sf-1 insertion loss isolation vswr dimensions in ( ) are in mm. unless otherwise noted: .xxx = ?.010 (.xx = ?.25) weight (approx.): 0.07 ounces 2 grams
|
